Control-company 5045 DIGITAL TIMER PLUS Manuel d'utilisateur télécharger pdf

SPECIFICATIONS

Countdown: 99 hours, 59 minutes, 59 seconds

Resolution: 1 second

Count-up: 99 hours, 59 minutes, 59 seconds

Resolution: 1 second

BUTTONS

- Hours

- Minutes

– Seconds

- Clear

S/S

- Start/Stop

CLEARING THE DISPLAY

If the timer is running, press the S/S button to stop the timer. To clear the display

to zero, press the C button. Clearing the display will also clear the previous

countdown time from memory.

COUNTDOWN ALARM TIMING

1. Clear the display to zero.

2. Press the

button to advance the hours digits.

Press the

button to advance the minutes digits.

Press the

button to advance the seconds digits.

Press and hold the

, or

button to rapidly advance the display.

3. Once the desired time is on the display, press the

S/S

button to begin

countdown timing.

4. When the timer reaches zero, an alarm will sound and the timer will begin

counting up.

The alarm will sound for one minute and then turn off automatically to preserve

battery life while the timer continues counting up.

While the alarm is sounding, pressing any button will silence the alarm and stop

the count-up timing. After one minute, pressing the

S/S

button will stop the

count-up timing.

Once the count-up timing has been stopped, pressing the

, or

buttons

will increment the display from the point that it was stopped and will set the timer

into countdown mode. (This will also clear the previous countdown time from

memory.)

MEMORY RECALL

When timing repetitive intervals, the memory function will recall the last

countdown time.

1. Follow steps 1 through 4 in the “Countdown Alarm Timing” section.

2. Once the count up timing has been stopped, press the

S/S

button to

recall the original programmed time.

3. Press the

S/S

button to begin countdown timing.

STOPWATCH (COUNT-UP) TIMING

1. Clear the display to zero.

2. Press the

S/S

button to begin count-up timing.

3. Press the

S/S

button to stop count-up timing.

Once timing is completed and the timer has been stopped, press the

button to

clear the display to zero.

TIMEOUT

The timer may be stopped during any running time (countdown or count-up) by

pressing the

S/S

button. Timing may be resumed by pressing the

S/S

button.

CONVERT A TIMEOUT TO A COUNTDOWN TIME

The timer may be stopped during any running time (countdown or count-up) by

pressing the

S/S

button. Once the timing has been stopped, pressing the

, or

buttons will increment the display from the point that it was stopped

and will set the timer into countdown mode. Once the desired time is on the

display, press the

S/S

button to begin countdown timing.

ALL OPERATIONAL DIFFICULTIES

If this timer does not function properly for any reason, replace the battery with a

new high quality battery (see “Battery Replacement” section). Low battery power

can occasionally cause any number of “apparent” operational difficulties.

Replacing the battery with a new fresh battery will solve most difficulties.

BATTERY REPLACEMENT

An incorrect display, no display or operational difficulties indicate that the battery

should be replaced. Slide open the battery cover on the back of the timer.

Remove the exhausted battery and replace it with a new 1.5 volt silver-oxide 357

size battery. Make certain the positive (+) side is visible. Replace the battery

cover.

Warranty, Service, or Recalibration

For warranty, service, or recalibration, contact:

CONTROL COMPANY

4455 Rex Road

Friendswood, Texas 77546 USA

Ph. 281-482-1714 Fax 281-482-9448

E-mail [email protected]

www.control3.com

Control Company is ISO 9001 Quality-Certified by

DNV and ISO 17025 accredited as a Calibration

Laboratory by A2LA.

Traceable

is a registered trademark of

Control Company

TRACEABLE

DIGITAL TIMER PLUS™ INSTRUCTIONS

CONTROL COMPANY 1

Résumé du contenu

Page 1 - CONTROL COMPANY

SPECIFICATIONS Countdown: 99 hours, 59 minutes, 59 seconds Resolution: 1 second Count-up: 99 hours, 59 minutes, 59 seconds Resolution: 1 secon

Commentaires sur ces manuels

Pas de commentaire

Control-company 5045 DIGITAL TIMER PLUS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Control-company 5045 DIGITAL TIMER PLUS. Control Company 5045 DIGITAL TIMER PLUS User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de mesure Control-company 5045 DIGITAL TIMER PLUS